SSPC Definitions SSPC-SP 1, Solvent Cleaning Solvent cleaning is a method for removing all visible oil, grease, soil, drawing and cutting compounds, and other
Date added: January 21, 2013 - Views: 209
Solvent Cleaning SSPC-SP1 Definition: Solvents such as water, mineral spirits, xylol, toluol etc., are used to remove solvent-soluble foreign matter from the surface of ferrous metals.
Date added: June 17, 2014 - Views: 4
SSPC-SP-1; Hand Tool Cleaning: SSPC-SP-2; St 2 or St 3: Identical toI SO St (2 or 3) Power Tool Cleaning: SSPC-SP-3; St 2 or St 3: Identical to ISO St (2 or 3) Flame Cleaning: SSPC-SP-4; F1: Identical to ISO F1: White Metal Blast Cleaning: SSPC-SP-5; NACE No. 1:
Date added: March 26, 2012 - Views: 222
SSPC-SP 11, Power Tool Cleaning to Bare Metal (revision) • No change in SP 11 cleanliness definition or minimum 1 mil profile requirement • Profile measurement method default now ASTM D 4417 Method B (depth micrometer) unless otherwise specified
Date added: April 17, 2013 - Views: 62
SSPC-SP13 / NACE 6 Surface Preparation of Concrete Provides requirements for surface preparation of concrete by mechanical, chemical, or thermal methods prior to the application of bonded protective coating or lining systems.
Date added: December 19, 2011 - Views: 953
SSPC-SP WJ-4/NACE WJ-4 March 10, 2012 1 This SSPC: The Society for Protective Coatings/NACE International joint surface preparation standard represents a
Date added: May 2, 2013 - Views: 53
SSPC-SP-8 Pickling - Removal of all mill scale, rust and rust scale by chemical reaction, or by electrolysis, or by both. It is intended that the pickled surface shall be completely free of
Date added: December 22, 2011 - Views: 215
SSPC PRODUCTS CATALOG 3 www.sspc.org Here’s what you will find inside the SYSteMS and SPecificationS, SSPc PaintinG Manual, VoluMe 2 HOW tO USE SSPC StANDARDS, SPECIFICAtIONS, AND
Date added: May 30, 2013 - Views: 8
3/5/2006 3 SSPC-SP 1- Solvent Cleaning • A method for removing all visible oil, grease, soil, drawing and cutting compounds, and other soluble contaminants from steel surfaces.
Date added: January 19, 2012 - Views: 235
SSPC-SP 6/NACE No. 3 September 1, 2000 61 This joint standard was prepared by the SSPC/NACE Task Group A on Surface Preparation by Abrasive Blast
Date added: January 27, 2012 - Views: 230
SSPC-SP 10/NACE No. 2 September 1, 2000 73 1. General 1.1 This joint standard covers the requirements for near-white blast cleaning of unpainted or painted steel
Date added: August 30, 2011 - Views: 318
SSPC-SP 13/NACE No. 6 Reaffirmed March 17, 2003 _____ Foreword This standard covers the preparation of concrete surfaces prior to the application of protective
Date added: February 9, 2012 - Views: 259
NANOMYTE® PT-20 Pretreatment for Steel Helps Reduce Level of Grit Blasting 400 APGAR DRIVE, UNIT E | SOMERSET, NJ 08873 | (732) 868-3141 | [email protected]
Date added: August 5, 2013 - Views: 18
NACE No. 1/SSPC-SP 5 NACE International 3 7.4 To meet the requirements of this standard, any visible rust that forms on the surface of the steel after blast
Date added: March 11, 2012 - Views: 222
SSPC-SP 12/NACE No. 5 Surface Preparation by Waterjetting (revision) • Current SP 12/NACE No. 5 will be broken into separate standards based on level of
Date added: June 21, 2012 - Views: 78
NACE No. 8/SSPC-SP 14 NACE International i _____ Foreword This joint standard covers the use of blast cleaning abrasives to achieve a defined degree of
Date added: June 3, 2014 - Views: 5
Surface Preparation MINIMAL PREPARATION For coatings requiring only minimal surface preparation, the surface needs to be prepared in accordance to SSPC-SP 1 and SSPC-SP 2 or SSPC-SP 3.
Date added: December 22, 2011 - Views: 195
- 1 - SURFACE PREPARATION STANDARDS General Information Steel Structures Painting COUNCIL STANDARD DESCRIPTION SSPC-SP 1 Solvent Cleaning – A method for removing all visible oil, grease, soil, drawing
Date added: August 22, 2013 - Views: 10
SSPC-SP 7/NACE No. 4 September 1, 2000 66 1.2 This joint standard allows tightly adherent rust, mill scale and/or old coating to remain on the surface.
Date added: July 1, 2014 - Views: 1
SSPC and NACE Surface Preparations SSPC-SP-1 Solvent Cleaning - Solvent Cleaning is a method for removing all visible oil, grease, soil, drawing and cutting
Date added: February 22, 2012 - Views: 91
SSPC-SP 11 (Power Tool Cleaning to Bare Metal) and SSPC-SP 3 (Power Tool Cleaning) • Use when effort required to eliminate stains from surface (as required by SP 11) is not warranted. 2012 Revisions to SSPC-SP 15 Commercial Grade Power Tool Cleaning
Date added: September 8, 2013 - Views: 32
SSPC-SP 5, White Metal Blast Cleaning. Each of the 4 degrees of blast cleaning is de- picted over rust grades B, C, and D. However, for rust grade A (intact mill scale), only the Near- White and White Metal grades of cleaning are shown.
Date added: February 6, 2012 - Views: 475
SSPC SSPC-SP-5 1.1 A white Metal Blast Cleaned surface, when viewed without magnification, shall be free of all visible oil, grease, dirt, dust, mill scale, rust, paint, oxides,
Date added: November 3, 2011 - Views: 1345
SSPC/NACE Surface Preparation SSPC-SP1- Solvent Cleaning Solvent Cleaning is a method for removing all visible oil, grease, soil, drawing and cutting compounds, and other
Date added: November 23, 2011 - Views: 288
SSPC – The Society of Protective Coatings SOUTHERN CALIFORNIA CHAPTER (2004 Chapter of the Year) 2004-2005 Board CHAIRMAN JUNE MEETING NOTICE Girth Weld and Pipeline Rehabilitation Coatings
Date added: June 13, 2013 - Views: 7
however, dry blast cleaning degrees rather follow the “SP” (SSPC) and, respectively the “No.” (NACE) notations. A sur-vey of the standards for wet, slurry, and UHP standards shows that, in principle, all proposed cleaning degrees relate
Date added: May 1, 2012 - Views: 340
SSPC-SP 5/NACE No. 1 September 1, 2000 58 considered requirements of the standard. The sections of SSPC-SP COM that discuss subjects related to industrial
Date added: July 9, 2014 - Views: 1
Surface Preparation Coating performance is directly affected by surface preparation. Coating integrity and service life will be reduced because of
Date added: February 7, 2012 - Views: 260
Surface preparation, Page 1 of 11. SURFACE PREPARATION The single most important function that can influence paint performance is the quality ... SSPC-SP International ISO-8501-1 White metal Sa 3 SSPC -SP 5 Sa 3 Near white metal Sa 2½ SSPC ...
Date added: December 14, 2011 - Views: 142
SSPC-SP COM November 1, 2004 2-1 SSPC: The Society for Protective Coatings SURFACE PREPARATION SPECIFICATIONS Surface Preparation Commentary for Steel and Concrete Substrates
Date added: April 29, 2014 - Views: 4
• SSPC-SP COM Surface Preparation Commentary for Steel and Concrete Substrates • SSPC-SP 1 Solvent Cleaning • SSPC-SP 2 Hand Tool ... haRdCOVER Item #08-02 SSPC Member Price: $205.00 Non-Member Price: $280.00 SSPC Painting Manual, Volume 2.
Date added: May 2, 2013 - Views: 63
Surface Cleanliness •Pre-Blast: SSPC-SP 1 (Solvent Cleaning) •Post-Blast: SSPC-SP7/NACE 4, Brush-Off Blast Cleaning SSPC-SP14/NACE 8, Industrial Blast Cleaning
Date added: April 11, 2012 - Views: 294
Society for Protective Coatings ... SSPC-SP 12/NACE No. 5, Surface Preparation and Cleaning of Metals by Waterjetting Prior to Recoating This standard is written primarily for applications in which the substrate is carbon steel.
Date added: May 13, 2013 - Views: 16
2-87 SSPC-SP 11 November 1, 1987 Editorial Revisions November 1, 2004 1. Scope 1.1 This standard covers the requirements for power tool cleaning to produce a bare metal surface and to retain or pro-
Date added: May 6, 2013 - Views: 26
SP-5 or SSPC-SP-10, as required (see Steel Structures Painting Council Manual, Volume 2 for more information). Blast-cleaned surfaces that are to be pretreated with wash primer shall be chemically treated
Date added: June 7, 2012 - Views: 4
Solvent Cleaning SSPC-SP-1 Hand Tool Cleaning SSPC-SP-2 St 2 or St 3 Identical to Power Tool Cleaning SSPC-SP-3 St 2 or St 3 Identical to Power Tool Cleaning SSPC-SP-11 Flame Cleaning SSPC-SP-4 F1 Identical to Pickling SSPC-SP-8
Date added: December 17, 2011 - Views: 104
SSPC-SP-03 St 3 St 3 International Standard for Surface Preparation prior to Painting/Coating SSPC-SP-10 Sa 2 ...
Date added: June 9, 2013 - Views: 37
7-95 nace no. 1/sspc-sp 5; nace no. 2/sspc-sp 10; nace no. 3/sspc-sp 6; nace no. 4/sspc-sp 7 tm0275-95 performance testing of steel and reinforced plastic sucker rods by the mixed-string, alternate-rod method 1-2003 . withdrawn nace standards the ...
Date added: September 28, 2012 - Views: 15
22.214.171.124 Surface shall be prepared to SSPC-SP-11 Power Tool Cleaning. The prepared surface shall be feathered into the surrounding intact paint, creating a smooth transition.
Date added: June 14, 2013 - Views: 1
CLEANING AND PAINTING STEEL 446.1. Description. Prepare steel surfaces for painting and apply paint. 446.2. ... SSPC-SP 10 blast-cleaning, and ensure that these areas are free of paint and overspray to within 1 in. or 1 bolt diameter, ...
Date added: June 5, 2013 - Views: 1
and Grit for surface Preparation for Protective Coatings - The following article is from Ervin Industries Technical Bulletin August 1, 1982 ... SSPC SP 6-63 defines the Commercial surface finish as one from which all oil, grease, dirt, ...
Date added: October 6, 2012 - Views: 24
3.1.4 Abrasive blast steel and aluminum plates, shapes, and ferrous piping, equal to NACE 2/SSPC-SP 10 of 2.5 and 2.6, establishing a surface
Date added: June 7, 2013 - Views: 7
Q:\Ann\NACE ListsofStandards Reports and Special Publications\List of NACE Standards.doc STANDARD PRACTICES Designation Title Item Number NACE No. 1/SSPC-SP 5 White Metal Blast Cleaning (RP0494-2006) 21065
Date added: February 6, 2013 - Views: 210
PPG Amercoat Level 1 Nuclear Product Qualifications Product Qualified Systems1,2 Substrate Surface Preparation1 DBA Test1,2 ANSI N101.2 DBA Test1,2 ASTM D 3911 ... Dimetcote 6N D6N Steel SSPC SP-10 Yes Yes Yes Yes Yes available
Date added: March 2, 2013 - Views: 5
Structures Painting Manual Volume 2. The SSPC specifications represent a broad consensus of users, suppliers, and public interest groups. It is ... SP 2, Hand Tool Cleaning: Removal of loose rust, loose mill scale, and loose paint to
Date added: November 28, 2013 - Views: 10
NACE #2 SSPC-SP 10-63T Near White Blast Cleaning. Near white blast cleaned surface finish. Defined as a surface from which all oil, grease, dirt, mill scale, rust, oxides, paint, corrosion products, or other foreign
Date added: July 18, 2012 - Views: 1
Recently Published SSPC Standards • SSPC-AB 4 Encapsulated Abrasive Media issued October 2009 • SSPC-SP 16, Brush-off Blast Cleaning of Coated
Date added: June 13, 2013 - Views: 17
accordance with SSPC-SP 6, No. 6, Commercial Bl ast Cleaning. To remain in place existing paint shall show no evidence of deterioration a nd be tightly adhered. Tightly adhered paint is defined as paint which cannot be removed by lifting with a dull putty knife.
Date added: November 23, 2011 - Views: 33
A&E Systems Info Sheet - Surface Preparation Standards Compared Commercial Blast SSPC-SP6 (SSI-Sa2), or NACE #3 Definition: All oil, grease, dirt, rust scale and foreign matter are completely removed from the surface and all rust, mill scale
Date added: January 27, 2012 - Views: 169
steel SSPC-SP 10 or SP 6 concrete ASTM D4259 or D4260 Method Airlessorconventionalspray Mixingratio(byvolume) 4partsComponentAto1part ... SSPC-16(C-200A)PDS/AI Page3of3 ©2010PPGIndustries•PrintedinU.S.A.•R2/10supersedesR9/00 One PPG Place, Pittsburgh, PA 15272 • Tel: 888-9PPGPMC
Date added: December 13, 2011 - Views: 297