Jis C 5101 4 pdfs

Searching:
Download
Jis C 5101 4 - Fast Download

Download Jis C 5101 4 from our fatest mirror

HU3 Series Useful of 4,000 hours at 105°C

2579 dl's @ 9413 KB/s

pdf
HU3 Series Useful of 4,000 hours at 105°C

1.4 HU3 Series Useful of 4,000 hours at 105°C • Conform RoHS Features • The HU3 series is the standard products. Product Specifications ... JIS C 5101-4 After the rated voltage with specified ripple current is applied at 105℃ for 2000 hours:

http://www.hitachi-aic.com/english/products/pdf/e_hu3.pdf

Date added: April 4, 2012 - Views: 12

pdf
ALUMINUM ELECTROLYTIC CAPACITORS FW Standard, For Audio ...

After sroring the capacitors under no load at 85°C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above.

http://www.partsconnexion.com/PDF/e-fw.pdf

Date added: November 26, 2011 - Views: 9

pdf
SCREW TERMINAL TYPE ALUMINUM ELECTROLYTIC CAPACITORS

SCREW TERMINAL TYPE ALUMINUM ELECTROLYTIC CAPACITORS 63 Hitachi AIC Inc. Ripple current should be under 60 Arms at M5 terminal in accordance with from ... (40˚C,120Hz) JIS C 5101-4. After the rated voltage with specified ripple current is applied at 85°C for 2000 hours:

http://www.hitachiaic.com/docs/products/Screw_Terminal_Electrolytic_Capacitors/HCG7A.pdf

Date added: May 17, 2013 - Views: 3

pdf
TCFG Series B Case Datasheet - Rohm

TCFG Series B Case c 2014 ROHM Co., Ltd. All rights reserved. 2014.03 - Rev.K ... As per 4.8 JIS C 5101-3 Item Performance Test conditions (based on JIS C5101-1 and JIS C5101-3) Loading at High temperature There should be no significant abnormality.

http://rohmfs.rohm.com/en/products/databook/datasheet/passive/tantalum_capacitor/tantalum_chip_capacitor/tcfg_b.pdf

Date added: May 27, 2013 - Views: 7

pdf
REFERENCE

(Refer to IEC 60384-20 [JIS C 5101-20]) 2 Insulation Resistance (IR) 3000 MΩ or more (According to 4. 3. 4) Apply a voltage of as below at 20°C±2°C. DC100V±1.5V : 1min±5s 3 Capacitance Within a range of specified value. (According to 4. 3. 2)

http://industrial.panasonic.com/ww/i_e/21088/spec12_e/spec12_e/WUX/WUX1_JX5_e.pdf

Date added: August 8, 2013 - Views: 6

pdf
Chip tantalum capacitors (Bottom surface electrode type ...

Chip tantalum capacitors (Bottom surface electrode type : Large capacitance) ... Resistance to solvents The indication should be clear As per 4.32 JIS C 5101-1 As per 4.18 JIS C 5101-3 Dip in the isopropyl alcohol for 30±5s, at room temperature.

http://rohmfs.rohm.com/en/products/databook/datasheet/passive/tantalum_capacitor/tantalum_chip_capacitor/tct_al.pdf

Date added: May 7, 2013 - Views: 10

pdf
0.01max at 1kHz 200% 60s min JIS C 5101-11, JIS C 5101-1 (mm ...

OUTLINE (mm) SPECIFICATIONS-40°C∼+105°C 5%(J), 10%(K) 0.01max at 1kHz UR×200% 60s 30000MΩmin JIS C 5101-11, JIS C 5101-1 50VDC, 100VDC, 200VDC

http://www.bdtic.com/DataSheet/Rubycon/F2D.pdf

Date added: March 13, 2013 - Views: 6

pdf
CHINSAN STANDARD SPECIFICATION - Chinsan Electronic Group

ALUMINUM ELECTROLYTIC CAPACITORS CHINSAN STANDARD SPECIFICATION 4.6 High and Low Temperature Characteristic: According to JIS-C-5101-4 (1998) 4.19 method, capacitors shall be placed in an oven:

http://www.chinsan.com/en/data/file/201109/standard%20specification.pdf

Date added: June 17, 2013 - Views: 9

pdf
Specifications - Mouser Electronics

After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.

http://www.mouser.com/ds/2/293/e-wt-30307.pdf

Date added: June 13, 2014 - Views: 1

pdf
ALUMINUM ELECTROLYTIC CAPACITORS GJ - Mouser Electronics

on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the requirements listed at right. Capacitance change Within ±20% of the initial capacitance value ALUMINUM ELECTROLYTIC CAPACITORS GJ series Snap-in Terminal Type,105°C Low-Profile Sized

http://www.mouser.com/ds/2/293/e-gj-17725.pdf

Date added: May 17, 2013 - Views: 2

pdf
SCREW TERMINAL TYPE ALUMINUM ELECTROLYTIC CAPACITORS New

FXW 2G 243 Y F 236 (PH) Sealing code The L dimension (mm) Case code Type of bracket code Capacitance code Rated voltage code ... (40˚C,120Hz) JIS C 5101-4. After the rated voltage with specified ripple current is applied at 85˚C for 5000 hours:

http://www.hitachiaic.com/docs/products/FXW_Series_Screw_Terminal_Aluminum_Capacitors.pdf

Date added: January 28, 2013 - Views: 2

pdf
FXR Series Useful of 8,000 hours at 85°C

FXR 2G 562 Y (E) Case dia code (∗) Type of bracket code Capacitance code Rated voltage code E case (øD: 77 mm) product Specifications ... JIS C 5101-4 After the rated voltage with specified ripple current is applied at 85℃ for 5,000 hours:

http://www.hitachi-aic.com/english/products/pdf/e_fxr.pdf

Date added: May 31, 2014 - Views: 1

pdf
Specifications - NICHICON CORPORATION | HOME

4 C 5 2 6 2 7 0 8 M 9 C 10 L 11 1 12 G 13 S 14 ... 4.5 0.8 to 1.1 φ D × L UD series Chip Type, Low Impedance ... After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, ...

http://nichicon-us.com/english/products/pdfs/e-ud.pdf

Date added: May 17, 2013 - Views: 2

pdf
0.001max at 1kHz 200% 60s min JIS C 5101-13, JIS C 5101-1 (mm ...

OUTLINE (mm) SPECIFICATIONS-25 ∼ +85°C 2%(G), 3%(H), 5%(J), 10%(K) 0.001max at 1kHz UR×200% 60s 30000MΩmin JIS C 5101-13, JIS C 5101-1

http://www.bdtic.com/DataSheet/Rubycon/P2S.pdf

Date added: May 17, 2013 - Views: 10

pdf
Specifications - NICHICON CORPORATION | HOME

After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.

http://nichicon-us.com/english/products/pdfs/e-vz.pdf

Date added: March 25, 2013 - Views: 6

pdf
E N G I N E E R I N G D R A F T

Unless otherwise specified, the product shall conform to JIS-C- 5101-4-1 Country of origin : MALAYSIA Manufacturing factory : Panasonic Electronic Devices Malaysia Sdn.Bhd. (PEDMA) No.1 Jalan Jemuju 16/13,40200 Shah Alam,Selangor Darul Ehsan, MALAYSIA. ...

http://media.digikey.com/pdf/Data%20Sheets/Panasonic%20Capacitors%20PDFs/EET-UQ2G271KF_EET-UQ2S271BF.PDF

Date added: May 27, 2013 - Views: 2

pdf
Datasheet Aluminum Electrolytic Capacitor

Datasheet Aluminum Electrolytic Capacitor FH series CapXon V.ED‐20130711 Part number FH471M016F160A Capacity 470 µF Voltage 16 VDC ... [Conditions]: Referring to JISC5101‐1 (1998) No:4.25 The capacitors are then stored with no voltage applied at a temperature of 105±2°C for 1000h.

http://www.scrfile.com/uploads/4/2/6/2/4262838/fh.pdf

Date added: December 10, 2013 - Views: 4

pdf
Specifications - Department of Electrical, Computer, and ...

After storing the capacitors under no load at 85˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. VR Rated voltage (V) tan δ(MAX.) 6.3 0.28 10 0.24 16

http://ecee.colorado.edu/~ecen4517/components/parts/e-vr.pdf

Date added: October 4, 2013 - Views: 6

pdf
S P E C I F I C A T I O N - Digi-Key

4. PERFORMANCE CHARACTERISTICS (TABLE-3) Test method JIS C 5101-3 Point 1 Category temp. range -55~+125℃ 2 Rated temp. +85℃ 3 Leakage current Not exceed the value shown 4.5.1 Applied V. :Rat. V.

http://media.digikey.com/pdf/Data%20Sheets/Nichicon%20PDFs/F91%20Tant.%20Series-new.pdf

Date added: May 27, 2013 - Views: 7

pdf
TCT Series P Case Tantalum capacitors Chip tantalum capacitors

TCT Series P Case Tantalum capacitors Rev.C 4/9 項目 性能 試験条件(JIS C 5101−1, JIS C 5101− 3に準拠) 温度特性 耐サージ電圧

http://tec.icbuy.com/upload/ROHM/tct_p.pdf

Date added: August 10, 2013 - Views: 5

pdf
TCTO Series AL Case Tantalum capacitors Under development ...

TCTO Series AL Case Tantalum capacitors Under development 4/6 Item Performance Test conditions (based on JIS C 5101−1 and JIS C 5101− 3)

http://tec.icbuy.com/upload/ROHM/tcto_al.pdf

Date added: December 10, 2013 - Views: 5

pdf
HCGF5A Series Useful of 4,000 hours at 85°C

JIS C 5101-4 After the rated voltage with specified ripple current is applied at 85℃ for 2,000 hours: Capacitance change : Within ±15% of the initial value measured Dissipation factor :175% or less than the initial value specified

http://www.hitachi-chem.co.jp/english/products/sds/files/e_hcgf5a.pdf

Date added: January 16, 2014 - Views: 1

pdf
Chip tantalum capacitors (Fail-safe open structure type)

As per 4.15.2 JIS C 5101-1 As per 4.17 JIS C 5101-1 As per 4.7 JIS C 5101-3 Item Performance Test conditions (based on JIS C5101-1 and JIS C5101-3) www.rohm.com 6/7

http://www1.futureelectronics.com/doc/ROHM%20SEMICONDUCTOR/TCFG.pdf

Date added: August 6, 2013 - Views: 4

pdf
7mmL ( ), -40˚C~+105˚C KS Series FEATURES

7mmL (高), -40˚C~+105˚C 21 Miniature Aluminum Electrolytic Capacitors KS FEATURES ... Industrial Standard JIS C - 5101-4 (IEC 60384-4) CASE SIZE TABLE ΦD4 5 6.3 8 F 1.5 2.0 2.5 3.5 Φd 0.45 0.45 α (L ≤7) 1 (L ≥9) 1.5 RIPPLE CURRENT MULTIPLIER

http://www.manyue.com/upload/products/standard/28.pdf

Date added: March 18, 2014 - Views: 4

pdf
MCH18 Ceramic capacitors Multi-layer ceramic chip capacitors

MCH18 Ceramic capacitors Rev.B 6/14 Resistance to solderin heat As per 4.14 of JIS C 5101-1. As per 4.10 of JIS C 5101-10 The solder specified in JIS Z 3282.

http://pccomponents.com/datasheets/ROHM-MCH18.PDF

Date added: December 10, 2013 - Views: 3

pdf
Aluminum Electrolytic Capacitors 2013/2014 Ver.2 New Series ...

Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value

http://www.chemi-con.co.jp/e/catalog/pdf/al-e/al-new-e1001n-140101.pdf

Date added: February 15, 2014 - Views: 5

pdf
8-4- 1 Test Method - Formed Foil for Anode, Low Voltage 1 of 2

95 C or higher 5. Test Equipment for Capacitance Measurement (1) Capacitance Measurement Device Capacitance Meter in accordance with JIS C 5101-1,4.7 Measurement Frequency: 120Hz 5% Measurement Voltage : 0.5Vrms or less (2) Measurement Vessel

http://www.kdk.com/e/productinfo/test_methods/c-08-04-e.pdf

Date added: May 9, 2013 - Views: 11

pdf
Pages - FC2

Other JIS-C-5101-4 At normal temperature, charge at surge voltage for 30 sec. and discharge via a 1kS protective resistor for 330 sec. Repeat for 1000 cycles. A1 -If any doubt arises, measure the current after applying rated voltage for 2 hours at +105 ...

http://capacitor.web.fc2.com/image4/xcon2006.pdf

Date added: March 18, 2014 - Views: 1

pdf
PMLCAP - Farnell element14

1/12 1. Scope . This specification covers polymer multi layer capacitor for use in electronic equipments. 2. Reference Standard JIS C 5101-1-1998

http://www.farnell.com/datasheets/91964.pdf

Date added: April 19, 2013 - Views: 5

pdf
FW - Components Bureau

Storage without voltage applied at 70° C for 500 hours and measured at 25° 5°C after voltage processing in JIS C 5101-4 item 4.1. I=1×C (After 5 minutes application of rated voltage) 0.06 (25°C,120Hz) DIMENSIONS (mm)

http://www.componentsbureau.com/site/media/files/Rubycon%20Website/Photoflash/FW.pdf

Date added: June 29, 2014 - Views: 1

pdf
Capxon - Ropla

CapXon 1 2 3 4 5 6 7 8 9 (9). SSSSleeve material Sleeve material PET PVC Nylon Code P C N 10. Rubber ... 4.6 Shelf life: According to JIS-C-5101-4 NO. 4.17 methods, after 96 ±4 hours test at +105 ℃without rated working voltage applied, ...

http://www.elektronik.ropla.eu/pdf/stock/cpx/pl681m6r3f115p1pb.pdf

Date added: May 31, 2013 - Views: 3

pdf
SPECIFICATIONS - 日本ケミコン株式会社

Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦ ±30% of the initial value D.F. (tanδ) ≦200% of the initial specified value

http://www.chemi-con.co.jp/e/catalog/pdf/bulletin/al-mzr-bulletin840a-e-140328.pdf

Date added: May 31, 2014 - Views: 1

pdf
ALUMINUM ELECTROLYTIC CAPACITORS - DIYPARADISO

JIS C 5101-4. After the rated voltage (specified ripple current convolution) is applied at 85℃for 5000 hours: Capacitance tolerance: ±15% or less of the initial value Dissipation factor: 175% or less of the specified initial value

http://www.diyparadiso.com/componenten%20passief/hitachi%20capfx2.pdf

Date added: May 17, 2013 - Views: 9

pdf
P1 P2 P1 - Welcome to Matsuo

No. Item Performance Test method 1 Leakage Current (µA) Shall not exceed 0.01 CV or 0.5 whichever is greater. Temperature : JIS C 5101-1, 4.9

http://www.ncc-matsuo.co.jp/pdf_e/281.pdf

Date added: April 6, 2013 - Views: 6

pdf
page 38 PY Series - Chinsan

Others Conforms to JIS-C-5101-4 (1998), characteristic W. DIMENSIONS (mm) PY Series High-temperature 125 ... 11/16/2010 4:26:03 PM ...

http://www.chinsan.com/tw/data/goods/201109/py.pdf

Date added: July 17, 2014 - Views: 1

pdf
10.5.1 PressureTemperature Ratings acc. to JIS B 2220 2239

JIS G 4051 S 20 C JIS G 4051 S 25 C JIS G 3201 SF 390A JIS G 3202 SFVC 1 JIS G 3201 SF 440A JIS G 3202 SFVC 2A JIS G 5101 SC410 ... Not applicable to JIS G 5101 SC 480 of material group 002 and ASTM SA 537 CLI and ISO 9328-2 PH355 of material

http://frame.leser.com/engineering/file/EHB_en_file_10.5.1-PressureTemperature-Ratings-acc-to-JIS-B-2220-2239.pdf

Date added: June 18, 2012 - Views: 145

pdf
ALUMINUM ELECTROLYTIC CAPACITORS CP - Nichicon

After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.

http://www.nichicon.co.jp/english/products/pdfs/e-cp.pdf

Date added: March 18, 2014 - Views: 4

pdf
+105˚C, Pen Cap. ( KM Series FEATURES - Man Yue Technology ...

Industrial Standard JIS C - 5101-4 (IEC 60384-4) CASE SIZE TABLE ΦD 10 12.5 F 5.0 5.0 Φd 0.6 0.6 α 2.0 β 1.0 RIPPLE CURRENT MULTIPLIER Frequency Coefficient Coefficient Freq. (Hz)50 120 300 1k 10k~ Rated Voltage 200~450V 0.80 1.00 1.25 1.40 1.60

http://www.samxon.com/upload/products/standard/KM.pdf

Date added: June 30, 2014 - Views: 1

pdf
5mmL ( ), +105˚C KF Series - Man Yue

Industrial Standard JIS C - 5101-4 (IEC 60384-4) CASE SIZE TABLE ΦD 4 5 6.3 8 F 1.5 2.0 2.5 2.5 Φd 0.45 RIPPLE CURRENT MULTIPLIER Frequency Coefficient Coefficient Freq. (Hz)50 120 300 1k 10k~ Cap (μF) ≤47 0.75 1.00 1.35 1.57 2.00 68~330 0.80 1.00 1.23 1.34 1.50

http://www.manyue.com/upload/products/standard/26.pdf

Date added: April 18, 2014 - Views: 5

pdf
KM +105˚C, General ( - Man Yue Technology Holdings Limited

Z-25˚C / Z+20˚C 3 3 3 4 4 6 6 15 For capacitance value >1000MF, add 0.5 per another 1000 MF for Z-25˚C / Z+20˚C ... Industrial Standard JIS C - 5101-4 (IEC 60384-4) CASE SIZE TABLE ΦD 5 6.3 8 (L <20) 8 (L ≥20) 10 12.5 16 18 22 25

http://www.samxon.com/upload/products/standard/31.pdf

Date added: July 7, 2014 - Views: 1

pdf
ALUMINUM ELECTROLYTIC CAPACITORS KZ - Parts Connexion

After storing the capacitors under no load at 85°C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 ... KZ series Premium Grade Type, For Audio Equipment KZ High Grade Dimensions φD×L (mm) tan δ (MAX.) Measurement frequency : 120Hz

http://www.partsconnexion.com/PDF/e-kz.pdf

Date added: June 14, 2013 - Views: 7

pdf
jis d 4103

Material Conversion (ASTM - KS - JIS - DIN) ST'D NUMBER Gr.50-30 D4101 SC 42 G 5101 SC 42 ... Gr. CA-15 D 4103 SSC1.SSC1-CF G 5121 SCS1 SCS1-CF. JIS: ... BS EN 10083-1,2 DIN EN 10084 NF A35-551 o O C T 4543 o O C T. JIS 2013 JIS Fax E-mail 2009 25 4 ISO 25 4 NOx AUS32 JIS FAX.

http://www.pdfspath.com/download/jis%20d%204103.pdf

Date added: August 2, 2014 - Views: 1

pdf
Chip tantalum capacitors (Fail-safe open structure type)

As per 4.15.2 JIS C 5101-1 As per 4.17 JIS C 5101-1 As per 4.7 JIS C 5101-3 Item Performance Test conditions (based on JIS C5101-1 and JIS C5101-3)

http://datasheet.octopart.com/TCFGP0J106M8R-Rohm-datasheet-12530193.pdf

Date added: January 18, 2014 - Views: 2

pdf
ST

4 10 2 5 6.3 3 6 ST φD P φd 4 1.5 ... After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Rated voltage (V)

http://www.paullinebarger.net/DS/Nichicon/Nichicon%20%5bradial%5d%20ST%20series.pdf

Date added: August 2, 2014 - Views: 1

pdf
Aluminum Electrolytic Capacitors RGL - LELON

The rated voltage shall be applied to the capacitors before the measurements (Refer to JIS C 5101-4 4.1). Ripple Current & Frequency (Hz) 60 120 500 1k 10k up ... RGL series 22μF ±20% 450V Bulk Package Gas Type10φ×30L Pb-free and PET coating case RGL 220 M 2W BK - 1030

http://www.lelon.com/down.php?f=/file/31.pdf&n=RGL.pdf

Date added: August 2, 2014 - Views: 1

pdf
MCH02 Ceramic capacitors Multi-layer ceramic chip capacitors

MCH02 Ceramic capacitors 4/6 Items Performance Resistance to solderin heat Test Method (As per JIS C 5101-1, JIS C 5101-10) As per 4.14 of JIS C 5101-1.

http://www.spezial.com/commercio/dateien/produktbeitraege/mch02.pdf

Date added: September 1, 2013 - Views: 4

pdf
電子Ⅲ-1 - JSA Web Store

― 電子Ⅲ- 1 ― ― 8 ― jis c 5101-2-1 :2009 電子機器用固定コンデンサ―第2-1部:ブランク個別規格:固定メ タライズドポリエチレンテレフタレートフィルム直流コンデンサ 評価水

http://www.webstore.jsa.or.jp/lib/jis2013/index/jishb13-23-1.pdf

Date added: December 10, 2013 - Views: 6

pdf
Super Capacitor Thin Type ED/L Series - Components Bureau

Refer to JIS C 5101-14.16 Temperature: –25 to 70˚C Specifications: ED/L Series Measurements shall be made at each of the temperatures specified above after the capacitor has reached thermal stability Step 1: +20±2˚C Step 2: –25±2˚C Step 3: +20±2˚C

http://www.componentsbureau.com/site/media/files/NEC%20Tokin/Supercaps/EDL.pdf

Date added: September 1, 2013 - Views: 3

pdf
Material conversion table DATA SHEET 1 of 5 - PandID B.V.

ASME(ASTM) KS JIS Section SPEC. GRADE ST'D NUMBER SYMBOL ST'D NUMBER SYMBOL DIN ... D 4101 SC 42 G 5101 SC 42 DIN 1681 GS-38 ... Material conversion table DATA SHEET 4 of 5 PandID B.V. -P.O. Box 22 - 2680 AA – Monster ...

http://www.lineblindvalve.eu/imagessuppliers/images%20literature/bulletin%20material%20conversion%20table%20line%20blind%20valves.pdf

Date added: December 16, 2011 - Views: 848

pdf
Performance and Test Methods - 株式会社MARUWA

Performance and Test Methods Item Performance Test Methods and Conditions X5R Characteristics (In accordance with JIS C 5101-1) Capacitance Within the tolerance Class 2

http://www.maruwa-g.com/e/products/electronic-parts/12_1_en_performanceandtestmethods.pdf

Date added: May 17, 2013 - Views: 7