Astm D 4258 pdfs

Searching:
Download
Astm D 4258 - Fast Download

Download Astm D 4258 from our fatest mirror

APPLICATION GUIDE & MOISTURE CURE URETHANE APPLICATION GUIDE ...

8518 dl's @ 5126 KB/s

pdf
APPLICATION GUIDE & MOISTURE CURE URETHANE APPLICATION GUIDE ...

3.1 ASTM C150 concrete types will vary in rate of cure. Wasser recommends a minimum cure of 7 days for non-immersion ... 4.1.1 ASTM D 4258-83 (Reapproved 1999) Standard Practice for Surface Cleaning Concrete for Coating: This practice is

http://wassercoatings.com/docs/applicationGuides/02-Concrete_Application.pdf

Date added: January 10, 2012 - Views: 31

pdf
Subject: Concrete Surface Preparation Guide

Clean surface per ASTM D4260, Wet surface with clean water, Et ch with 10-15% muriatic acid solution at the rate of 1 gallon per 75 square feet, Scrub with stiff brush, Allow sufficient time for scrubbing and until bubbling stops, If no

http://mmsystemscorp.com/downloads/technical_bulletins/110%20Tech%20Bulletin%20-%20Concrete%20Surface%20Preparation.pdf

Date added: February 8, 2012 - Views: 202

pdf
kolorstone classic

Kolorstone Classic is used with Kolorstone Kolor Flex. BASIC USE: Recommended for construction or repair of: • Resurfacing sidewalks, driveways, patios, steps ... • ASTM D 4258 Surface Cleaning Concrete for Coating • ASTM D 4259 Abrading Concrete

http://kolorstone.com/pdf/kolorstone_classic_spec.pdf

Date added: November 5, 2012 - Views: 2

pdf
StoCoat Acryl - StoCorp

ASTM D-412 585 (4.1) StoCoat Acryl is an acrylic-based interior and exterior coating used over prepared concrete, masonry, ... Refer to ASTM D-4258 and ASTM D-4261 for complete details on methods of preparing cementitious substrates for coatings.

http://www.stocorp.com/dmdocuments/S155-80201_TB_Rev01.pdf

Date added: June 29, 2013 - Views: 2

pdf
CONCRETE SURFACE PREPARATION - Innovative Equine Systems

Other ASTM tests which are applicable to concrete preparation are: • ASTM-D-4258 Standard Practice for Surface Cleaning Concrete for Coating

http://www.equinesystems.com/downloads/Concrete_surface_preparation.pdf

Date added: December 8, 2011 - Views: 35

pdf
118 Primer/Admixture - VelveTop

REV 1/04 (Supercedes Previous Editions) PREPARATION: (As Primer Cont.) Slick or sealed surfaces must be thoroughly roughened. Refer to: •ASTM D 4258 Surface Cleaning Concrete for Coating

http://www.velvetop.com/PDFs/118_PrimerAdmixture.pdf

Date added: March 20, 2013 - Views: 9

pdf
Product Bulletin - StoCorp

Fill surface voids. Refer to ASTM D-4258 and ASTM D-4261 for complete details on methods of preparing cementitious substrates for coatings.

http://www.stocorp.com/dmdocuments/S155-80217%20Coat%20Lotusan%20-%20%20Low%20VOC-%20Rev%2003.pdf

Date added: October 8, 2013 - Views: 1

pdf
Stone Veneer Mortar - Sakrete

Sakrete® Stone Veneer Mortar is a high performance, polymer modified mortar designed to set and grout artificial stone on horizontal or vertical ... •ASTM D 4258 Surface Cleaning Concrete for Coating •ASTM D 4259 Abrading Concrete

http://www.sakrete.com/uploads/downloads/Sakrete%20Stone%20Veneer%20Mortar%20Tech%20Data%203-12.pdf

Date added: September 29, 2012 - Views: 8

pdf
B-1 Leveler - RES Arch

PREPARATION (Cont.): Refer to: •ASTM D 4258 Surface Cleaning Concrete for Coating • ASTM D 4259 Abrading Concrete •ASTM D 4261 Surface Cleaning Concrete Unit

http://www.resarch.com/bonsalamerican/PDFdocs/B1LEVELE.PDF

Date added: November 12, 2012 - Views: 15

pdf
3 Concrete - BASF

(refer to AStM D 4258). remove weak, contaminated, or deteriorated concrete by shotblasting, bushhammering, gritblasting, scarifying, or other suitable mechanical means. Steel remove dirt, grease, and oil with a suitable industrial-grade cleaning-and-degreasing

http://www.buildingsystems.basf.com/p02/USWeb-Internet/buildingsystems/en_GB/function/conversions:/publish/content/microsites/buildingsystems/products/items/pdfs/basf-masteremaco-adh-326-tds.pdf

Date added: August 28, 2014 - Views: 1

pdf
Specification for arcuSStonecoat™ over Horizontal concrete ...

B. ASTM D 4258: Standard Practice for Surface Cleaning Concrete for coating. C. ASTM D 4260: ... D. ArcusStone Mineral Oxide Powdered Pigments. E. Professional Products of Kansas’ Extra Strength Water Repellant Sealer. F. Muriatic Acid.

http://www.arcusstonedistributors.com/pdf/ArchitecSpec-horiz.pdf

Date added: August 2, 2013 - Views: 2

pdf
Masonry Coating - Sakrete

ASTM D 4258 Surface Cleaning Concrete for Coating • ASTM D 4259 Abrading Concrete • ASTM D 4261 Surface Cleaning Concrete Unit Masonry for Coating. PREPARATION Cont. Relieve hydrostatic active water pressure by drilling temporary drainage holes

http://www.sakrete.com/uploads/downloads/Sakrete%20Masonry%20Coating%205-101.pdf

Date added: August 2, 2013 - Views: 3

pdf
SECTION 072713 MODIFIED BITUMINOUS SHEET AIR BARRIERS PART 1 ...

and cracks according to ASTM D 4258. ... adhesion of 16 lbf/sq. in. according to ASTM D 4541 for each 600 sq. ft. of installed air barrier or part thereof. D. Air barriers will be considered defective if they do not pass tests and inspections. 1. Apply additional ...

http://www.uh.edu/plantops/departments/fpc/master-specs/07%2027%2013%20MODIF%20BITUM%20SHEET%20AIR%20BARRIERS.pdf

Date added: February 19, 2013 - Views: 7

pdf
225 - RFP (Page 1)

Sto RFP 225 Division 7 Sto RFP is a ready-mixed acrylic-based plaster material used as a ... ASTM D- 4258 and ASTM D-4261 for complete details on methods of preparing cementitious substrates for coatings. Sto Exterior Insulation and Finish Systems

http://stodistributor.com/othersections.nsf/htmlmedia/fsd+225+rfp+tb+.pdf/$file/fsd+225+rfp+tb+.pdf

Date added: February 19, 2013 - Views: 1

pdf
Concrete Surface Preparation

ASTM-D-4263 Standard Test Method for Indicating Moisture in Concrete by the Plastic Sheet Method. Other ASTM Tests which are applicable to concrete preparation are: o ASTM-D-4258 Standard Practice for Surface Cleaning Concrete for Coating

http://www.rephouse.com/cms/assets/specifications/spec152.pdf

Date added: May 30, 2012 - Views: 30

pdf
SECTION 071413 HOT FLUID-APPLIED RUBBERIZED ASPHALT WATERPROOFING

Rubberized-asphalt waterproofing membrane, reinforced. B. Related Sections: 1. Section 044300 "Stone Masonry" for metal counter flashing. ... to ASTM D 4258. 2. Adhere strip of elastomeric sheet to substrate in a layer of hot rubberized asphalt.

http://planroom.adsmo.net/grabImage.asp?image_id=111134

Date added: May 8, 2013 - Views: 7

pdf
280/281/282/283 Powerflex (Page 1)

Powerflex 280 Sto Powerflex Fine 281 Sto Powerflex Medium 282 Sto Powerflex Swirl 283 Sto Powerflex Freeform Division 7 ... Refer to ASTM D-4258 and ASTM D-4261 for complete details on methods of preparing cementitious substrates for coatings. Mixing

http://stodistributor.com/othersections.nsf/htmlmedia/fsd+236+flexfinish+tb.pdf/$file/fsd+236+flexfinish+tb.pdf

Date added: December 10, 2012 - Views: 3

pdf
Testing Protocol for Manhole Coatings R. Saravanan and C ...

Testing Protocol for Manhole Coatings R. Saravanan and C. Vipulanandan, Ph.D., P.E. Center for Innovative Grouting Materials and Technology ... (ASTM D 4258 for surface cleaning concrete for coating; ASTM D 4259 for surface preparation of abrading concrete).

http://cigmat.cive.uh.edu/sites/cigmat/files/files/conference/poster/2012/7.pdf

Date added: December 17, 2013 - Views: 2

pdf
ASH GROVE KOLORSTONE TWIN-PAK MIXING KIT MSDS Sheets Contents ...

ASH GROVE KOLORSTONE TWIN-PAK MIXING KIT MSDS Sheets Contents: Kolorstone Classic Spec Sheet Kolorflex Admixture Spec Sheet. kolorstone classic ... ASTM D 4258 Surface Cleaning Concrete for Coating ASTM D 4259 Abrading Concrete

http://kolorstone.com/pdf/TWIN-PAK-MIX-KIT-SPEC.pdf

Date added: August 2, 2013 - Views: 2

pdf
Technical Bulletin #1-2004 - Polymer Flooring & Coating ...

Technical Bulletin #1-2 D. Previous Contamination can affect the bond of the resinous flooring and must be removed. Types of contamination are: 1. ... ASTM-D-4258 Standard Practice for Surface Cleaning Concrete for Coating

http://www.keyresin.com/pdf/key_resin_technical_bulletin_1.pdf

Date added: June 10, 2013 - Views: 5

pdf
07150 Polymeric Sheet Waterproofing - Caltrain

Do not apply waterproofing in rain, fog, or mist. D. Maintain adequate ventilation during preparation and application of waterproofing ... moisture by plastic sheet method according to ASTM D 4263. ... from joints and cracks according to ASTM D 4258. 1.

http://www.caltrain.com/assets/_engineering/engineering-standards-2/Specs/Div7/07150.pdf

Date added: October 11, 2012 - Views: 7

pdf
Stone Veneer Moratr Product Info - Building Products, Paragon ...

PARAGON BUILDING PRODUCTS PRODUCT INFORMATION ~ ITEM NO. 15650 ... ASTM D-4258 Surface Cleaning Concrete for Coating ASTM D-4259 Abrading Concrete ASTM D-4260 Acid Etching Concrete MIXING: The suggested water ratio is 25% per volume of material or 6 quarts of cool clean

http://www.paragonbp.us/docs/prd_info_stone_veneer_mortar.pdf

Date added: October 26, 2013 - Views: 3

pdf
Concrete Slabs: Surface Prep & Moisture Tests

ASTM D 4258 - Standard Practice for Surface Cleaning Concrete for Coating. ASTM D 4259 - Standard Practice for Abrading Concrete. ASTM F 1869 - Standard Test Method for Measuring Vapor Emission Rate of Concrete Subfloor Using Anhydrous CaCl2.

http://www.conspectusinc.com/downloads/Documents/Conspectus%20Tech%20Tips%20C2030%20Concrete%20Floor%20Prep%20%26%20Test%20rev10.12.29.pdf

Date added: May 8, 2013 - Views: 9

pdf
Sto Powerwall Finish 80292, 80296 - 80299 - Product Data

smoothness with appropriate Sto leveling materials. Refer to ASTM D-4258 and ASTM D-4261 for complete details on methods of preparing cementitious substrates for coatings. StoPowerwall™ Finish is a ready mixed, flexible, acrylic, textured

http://www.buildsite.com/pdf/stocorp/Sto-Powerwall-Finish-80292-80296-80299-Product-Data-B26676.pdf

Date added: December 26, 2013 - Views: 3

pdf
3 Concrete - Basf Construction Chemicals

(refer to AStM D 4258). 3.Remove weak, contaminated, or deteriorated concrete by shotblasting, bushhammering, gritblasting, scarifying, or other suitable mechanical means. Follow mechanical cleaning ... MasterInject ® 1500 Low-viscosity epoxy adhesive

http://www.caribbean.basf-cc.com/en/products/Crack_Repair_Injection/low_viscosity_epoxy/MasterInject_1500/Documents/basf-MasterInject-1500-tds.pdf

Date added: February 16, 2014 - Views: 1

pdf
KAUFMAN

other foreign matter as per ASTM D-4258. Sandblasting and mechanical scarification according to ASTM D-4259 are the preferred methods of properly preparing the floor and removing the laitance, Acid etching according to ASTM D-4260

http://www.kaufmanproducts.net/pdf_files/pd_pdf_eng/110.pdf

Date added: May 28, 2013 - Views: 2

pdf
City of San Diego, CWP Guidelines

City of San Diego, CWP Guidelines $# NTS: This Guide Specification addresses the use of the Linabond Simulform System to repair existing flat surfaces in pump stations, ... ASTM D 4258 Practice for Surface Cleaning Concrete for Coating .

http://www.sandiego.gov/mwwd/business/cwpspecs/pdf/02740.pdf

Date added: April 23, 2013 - Views: 14

pdf
Installation Instructions - Concrete Sealants Inc.

The following ASTM standards have been drafted in order to maximize concrete coating applications: • ASTM D 4258 Standard Practice for Surface Cleaning of Concrete for Coating, • ASTM D 4259 Standard Practice for Abrading Concrete, and

http://conseal.com/installation/CS-55.pdf

Date added: December 17, 2013 - Views: 3

pdf
UltraCrete Spray Deck PRODUCT DATA 3951 - Sherwin-Williams

ULTRACRETE SPRAY DECK CONTRACTOR’S CHOICE • POLYMER MODIFIED • DECORATIVE FINISH LIMITATION OF LIABILITY: COLOR WHEEL MAKES NO WARRANTY OR GUARANTEE OF ANY KIND, ... ASTM D 4258 - Practice for Surface Cleaning Concrete for Coating, ASTM D 4259 - Practice

http://brands.sherwin-williams.com/pdf/3951_pds.pdf

Date added: February 27, 2014 - Views: 3

pdf
THIS IS A SAMPLE SPECIFICATION FOR THE INDICATED PRODUCT. IT ...

I. ASTM D 4258 - Surface Cleaning Concrete for Coating. J. ASTM D 4259 - Abrading Concrete. K. ASTM C-413 - Water Absorption . L ... Quartzite 6000 to sand-cement setting beds, regardless of condition. Sand-

http://usa.sika.com/dms/getdocument.get/98d4a6e4-b221-33a7-ba26-8c4d8027fdb5/sc-cpd-SikafloorQuartzite6000Topcoat-us.pdf

Date added: January 28, 2013 - Views: 10

pdf
Merflex A - Product Data - BuildSite

MERFLEX ™ A Floor system ... Flammability ASTM D-635 Self Extinguishing Water Absorption ASTM D-570 0.3% Shore D Hardness ASTM D- ... ASTM D 4258-83 Standard Practice for Surface Cleaning Concrete for Coating ASTM D 4259-83 Standard Practice for Abrading

http://www.buildsite.com/pdf/sikaflooring/Merflex-A-Product-Data-322094.pdf

Date added: May 15, 2013 - Views: 3

pdf
2004 CSI MasterFormat SECTION 099700 Cementitious Coatings ...

B.ASTM D 4258: Standard Practice for Surface Cleaning Concrete for coating. C.ASTM D 4260: Standard Practice for Acid Etching Concrete. D.ASTM D 4262: Standard Test Method for pH of Chemically Cleaned or Etched Concrete Surfaces. 1.3 SYSTEM DESCRIPTION

http://www.arcusstonedistributors.com/blog/ArcusStonecoat%20Specification%20for%20Horizontal%20Overlays.pdf

Date added: May 28, 2013 - Views: 6

pdf
Concrete Surface Preparation - EPOX-Z

Other ASTM Tests which are applicable to concrete preparation are: ASTM-D-4258 Standard Practice for Surface Cleaning Concrete for Coating ASTM-D-4259 Standard Practice for Abrading Concrete ASTM-D-4260 Standard Practice for Acid Etching Concrete

http://www.epox-z.com/wp-content/uploads/concrete_surface_preparation.pdf

Date added: June 10, 2013 - Views: 12

pdf
PARAGON BUILDING PRODUCTS PRODUCT INFORMATION ~ ITEM NO ...

ASTM D 4258 for Surface Cleaning Concrete for Coating • ASTM D 4259 for Abrading Concrete • ASTM D 4261 for Surface Cleaning Concrete Unit Masonry for Coating MIXING: Water requirements are 17% per volume of material or 6.5 quarts per 80 pounds

http://www.bestmaterials.com/PDF_Files/masonry_mortar_mix_type-s_datasheet.pdf

Date added: April 29, 2014 - Views: 1

pdf
PRODUCT DATA WEARCOAT 440-IPC - Home » CFI Coatings

D-4258, ASTM D-4259, ASTM D-4260, ASTM D-4262. Apply to clean, dry surfaces. Remove all ... Wearcoat 440-IPC epoxy is mixed as follows: Mix Part A for 2 to 3 minutes to assure full dispersion of pigment. Pour Component B (hardener) into

http://www.coating4ind.com/assets/Wearcoat-PDS/E-W-440.pdf

Date added: June 29, 2013 - Views: 5

pdf
KAUFMANKAUFMAN - Kaufman Products

foreign matter as per ASTM D-4258 and D-4259. KAUFMANKAUFMAN PRODUCT KAUFMAN 3811 CURTIS BALTIMORE, 410-354-8600 ... according to ASTM D-4260 with Kaufman Products Concrete Floor Etch or 15-20% muriatic acid solution can be used as an alternative.

http://www.kaufmanproducts.net/pdf_files/pd_pdf_engOLD/106.pdf

Date added: October 22, 2013 - Views: 1

pdf
Surface Preparation for Resin Systems - Epoxy Chemical ...

Other ASTM Tests which areapplicable to concrete preparation are: ASTM-D-4258 Standard Practice for Surface Cleaning Concrete for Coating ASTM-D-4259 Standard Practice for Abrading Concrete ASTM-D-4260 StandardPractice for Acid Etching Concrete

http://www.epoxysystems.com/techdata/surfaceprep.pdf

Date added: April 9, 2013 - Views: 3

pdf
EDITOR’S NOTE: For hard copy editing, turn on hidden text ...

ASTM D 4258 - Standard Practice for Surface Cleaning Concrete for Coating 6. ASTM D 4259 - Standard Practice for Abrading Concrete. 7. ASTM D 4263 - Standard Test Method for Indicating Moisture in Concrete by the Plastic Sheet Method. 8.

http://www.sitetechnologies.com/filebin/pdf/WindSafe_CSI.pdf

Date added: January 29, 2012 - Views: 48

pdf
Polibrid 705 Technical Data Sheet - Protective Coatings ...

nate per ASTM D -4258, then abrasive blast clean per ASTM D - 4259 to produce surface profile resembling coarse sandpaper.and cover all expos Eliminate leaks and infiltrations and remove standing water. R e-surface areas with excessive cavities (bugholes) or exposed a g-

http://www.international-pc.com/North-America/Documents/polibrid-705-pds.pdf

Date added: October 26, 2012 - Views: 16

pdf
SECTION 07 13 26 SHEET MEMBRANE WATERPROOFING A. Cast-In ...

moisture by plastic sheet method according to ASTM D 4263. C. Notify Architect in writing of anticipated problems using waterproofing over substrate. 3.2 SURFACE PREPARATION: A. Clean, prepare and treat substrate according to manufacturer’s instructions. Provide ...

http://rep.southernrepro.com/srisite/library/31772/specs/Div_07_Thermal_and_Moisture_Protection.pdf

Date added: August 28, 2014 - Views: 1

pdf
ANOTHER PAINT/COATING PROJECT SUPPLIED BY SOMAY City ...

Clean Concrete per ASTM-D-4258-92 Abrade Concrete per ASTM-D-4259 Prime Coat: SOMAY/Carboline “Phenoline”® 187 Primer, Modified Epoxy Phenolic Apply 5 mils dry film thickness Color: Red Finish Coat: SOMAY ...

http://www.somay.com/pdf/126.pdf

Date added: November 30, 2013 - Views: 1

pdf
of

complying with ASTM D 4258, before coating surfaces. 1. Comply with ASTM C 1193 forjoint-sealant installation. 2. ... Absorption-Freeze Resistance: No visible deleterious effects and negligible weight loss after 60 cycles per EIMA 101.01.

http://planroom.adsmo.net/grabImage.asp?image_id=110932

Date added: August 28, 2013 - Views: 1

pdf
SECTION 02716 - CONCRETE SEWER STRUCTURAL SPOT REPAIR

ASTM D 4258 Practice for Surface Cleaning Concrete for Coating ASTM D 4259 Practice for Abrading Concrete ASTM D 4262 Standard Test Method for pH of Chemically Cleaned or . Etched Concrete Surfaces . 1.5 SHOP DRAWINGS AND SAMPLES A.

http://www.sandiego.gov/mwwd/business/cwpspecs/pdf/02716.pdf

Date added: June 14, 2012 - Views: 3

pdf
THIS IS A SAMPLE SPECIFICATION FOR THE INDICATED PRODUCT. IT ...

D. ASTM D 696 - Coefficient of Linear Thermal Expansion of Plastics. E. ASTM D 2240 - Rubber Property - Durometer Hardness. F. ASTM D 4258 - Surface Cleaning Concrete for Coating. G. ASTM D 4259 - Abrading Concrete. 09 67 00

http://usa.sika.com/dms/getdocument.get/a0633497-a0e8-342a-92a2-e239284bdd27/sc-cpd-SikafloorPurCem22n-us.pdf

Date added: May 28, 2013 - Views: 3

pdf
with Shaw 5100SD Solvent Free ESD Flooring Adhesive ...

to adhesive label for more detailed information regarding spread rates and drying times, or contact your StaticSmart Flooring Representative. ... ASTM D 4258 Cleaning test of coating concrete surface ASTM D 4259 Abrasion test of concrete surface

http://www.julieindustries.com/assets/pdf/Installation_Summit%20Series12.pdf

Date added: February 6, 2013 - Views: 2

pdf
ASPHALT MASTIC DAMPPROOFING GENERAL - MAVCON

A. Emulsified-Asphalt Primer: ASTM D 1227, Type III, Class 1, provided by dampproofing manufacturer. B. Sheet Metal Flashing: 1. ... ASTM D 4258. C. Concrete: 1. Remove fins, ridges, mortar, and other projections and fill honeycomb, aggregate

http://www.mavcon.com/projects/projectsforbid/central_fire_station_temple_tx/Specs/Div%207.pdf

Date added: October 29, 2012 - Views: 12

pdf
07 13 26 Self-Adhering Waterproofing

joints and cracks according to ASTM D 4258. 1. Install sheet strips and center over treated construction and contraction joints and cracks exceeding a width of 1/16 inch (1.6 mm). CREC-International Magnet School SELF-ADHERING SHEET WATERPROOFING

http://www.rkinsulation.com/drawings/printer/CT-International%20Magnet%20School/01-Specifications/02-Volume%20I/046-071326.pdf

Date added: August 28, 2014 - Views: 1

pdf
PRODUCT INFORMATION FT840™ High Service / Impact Resistant ...

FT 840™ High Service / Impact Resistant System is a 1/8” three component system that includes 100% solids epoxy and selected aggregates brought together to form a laminating ... ASTM D-4258-83 Standard Practice for Surface Cleaning Concrete for Coat-ing

http://www.floortechinc.com/assets/templates/001/pdf/FTproductline/FT840HighService_ImpactResistSystem_PI.pdf

Date added: January 24, 2013 - Views: 2

pdf
pro wall-tite sanded - Ash Grove Packaging | Building America ...

ASTM D 4258 Surface Cleaning for Concrete Coating ASTM D 4259 Abrading Concrete ASTM D 4261 Surface Cleaning Concrete Unit Masonry for ... Ash Grove Pro® Wall-Tite Sanded 2 Copyright 2009 Ash Grove Packaging, Inc 28109. 7. Placement

http://www.ashgrovepkg.com/assets/pdf/proseal-walltitesanded-SPEC.pdf

Date added: March 19, 2014 - Views: 1

pdf
THIS IS A SAMPLE SPECIFICATION FOR THE INDICATED PRODUCT. IT ...

D. ASTM D 696 - Coefficient of Linear Thermal Expansion of Plastics. ... F. ASTM D 4258 - Surface Cleaning Concrete for Coating. G. ASTM D 4259 - Abrading Concrete. H. ICRI Guideline 03732 – Selecting and Specifying Concrete Surface Preparation for Sealers, Coatings and Polymer Overlays

http://spectrumfloors.com/pdf/Sikafloor/PurCem/19N/PurCem19N_spec.pdf

Date added: May 13, 2013 - Views: 6