Astm D4318 docs

Searching:
Download
Astm D4318 - Fast Download

Download Astm D4318 from our fatest mirror

Sec 6.1: Cement Stabilized Sand Backfill - Dallas

5797 dl's @ 6686 KB/s

doc
Sec 6.1: Cement Stabilized Sand Backfill - Dallas

ASTM D4318 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils. ... Cement stabilized sand shall not be placed or compacted in standing or free water. Material will be delivered in tandem or trailer trucks.

http://www.dallascityhall.com/dwu/word/6.1_CementStabilizedSandBackfil_aug2011.doc

Date added: January 31, 2012 - Views: 39

doc
ASTM STANDARDS REFERENCED IN THE NRC REGULATORY GUIDES

D4318 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of. ... General reference to ASTM standards. 7.11 Fracture Toughness Criteria of Base Material for Ferritic Steel Shipping Cask Containment Vessels with a Maximum Wall Thickness of 4 Inches (0.1 m)

http://www.astm.org/portals/files/NRC_REGULATORY_GUIDES.doc

Date added: September 10, 2012 - Views: 176

doc
PROJECT MANUAL - United States Department of Veterans Affairs

ASTM D4318 Test Method for Liquid Limit, Plastic Limit and Plasticity Index of Soils . 1.3 . DENSITY CONTROL TESTING . A. Field Density Testing . Meet the quality control and quality assurance testing requirements in Section 01400, Contractor Quality Control and Owner Quality Assurance.

https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=228298&FileName=VA-259-11-RP-0190-501.DOCX

Date added: February 11, 2012 - Views: 35

doc
03/2002 - Grinnell Concrete Paving Stones, Inc. - Live On Us

ASTM D4318 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils. ASTM D4491 Standard Test Method for Water Permeability of Geotextiles by the Permittivity Method

http://www.grinnellpavers.com/files/specs/Grinnell_Spec_beveled_straight_AWS-product.doc

Date added: January 6, 2014 - Views: 9

doc
Instructions for Testing and Reporting - AMRL

Liquid Limit of Soils T89-10 or D4318-10: Determine the liquid limit by Method A (multipoint method). ... Since ASTM D427 Shrinkage Factors of Soils using the Mercury Method was withdrawn as an active standard, ASTM D4943 is offered as another (but not equivalent) method for determining the ...

http://www.amrl.net/AmrlSitefinity/publicdocs/pspdatasheets/SOIL%20INST%20165-166.doc

Date added: April 26, 2012 - Views: 19

doc
Instructions for Testing and Reporting - AMRL

All tests should be conducted on each of the two samples according to the AASHTO or ASTM methods indicated. Report the results of a single determination only, ... Plastic Limit of Soils T90-00 or D4318-10: Determine the plastic limit and report the results to the nearest 0.1 percent.

http://www.amrl.net/amrlsitefinity/publicdocs/pspdatasheets/SOIL%20INSTRUCTIONS%20167-168.doc

Date added: May 3, 2013 - Views: 14

doc
SECTION 16130 - American Water

Use soils with dual class designation according to ASTM D2487, and which are not defined above, ... Material passing number 40 sieve shall meet the following requirements when tested in accordance with ASTM D4318: Plasticity index: not exceeding 7.

http://www.amwater.com/files/31%2023%2023%20-%20Utility%20Backfill%20Materials.doc

Date added: July 25, 2013 - Views: 11

doc
Supplemental Boring Request Form

... (ASTM D4318) - 4 Atterberg Limits 1 Atterberg Limits 2 Atterberg Limits 3 Atterberg Limits 4 Organic Content Tests (ASTM D2974) - 4 Organic content 1 Organic content 2 Organic content 3 Organic content 4 Point Load Strength Index of Rock Core (ASTM D5731) - 1 Strength Index Test ...

http://www.maine.gov/mdot/martinspointbridgedb/documents/MPBsuppementalboringrequestform.doc

Date added: April 12, 2013 - Views: 9

doc
To apply for A2LA accreditation under the geotechnical field ...

ASTM D4318 Liquid Limit, Plastic Limits and Plasticity Index of Soils. ASTM D4643 Determination of Water (Moisture) Content of Soil by the Microwave Oven Method. ASTM D4959 Determination of Water (Moisture) Content of Soil by the Direct Heating Method.

http://www.a2la.org/selectionlists/Geotechnical_Selection_List.DOC

Date added: May 12, 2012 - Views: 32

doc
03/2002 - EP Henry

ASTM D4318 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils [Last Update: 00] 12. ASTM D4595 Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method [Last Update: 86 (2001)] 13 ...

http://www.ephenry.com/download-file.ashx?url=%2fmedia%2fhow-tos%2fDiamond+Pro+Specification.doc

Date added: May 8, 2013 - Views: 11

doc
ELECTROCHEMICAL PRESSURE INJECTION - Hayward Baker

ASTM D698 Standard Proctor. ASTM D2216 Moisture Content. ASTM D4318 Atterberg Limits. ASTM D4546 Method ‘B’ Swell. 1.4 DEFINITIONS. A. Electrochemical Injection. The electrochemical pressure injection process consists of pumping an ion.

http://www.haywardbaker.com/WhatWeDo/Techniques/GroundImprovement/InjectionSystemsForExpansiveSoils/Specifications/Downloads_GetFile.aspx?id=3083

Date added: April 2, 2014 - Views: 1

doc
Download - Alpha -Omega Geotech, Inc.

Atterberg limits (ASTM D4318) Consolidated-Undrained with Pore Pressures (ASTM D4767) Sieve analyses (ASTM D422) Unconsolidated-Undrained (ASTM D2850) Hydrometer analyses (ASTM D422) Direct shear – Consolidated, Drained (ASTM D3080)

http://www.aogeotech.com/downloads/servicecapabilities.doc

Date added: September 19, 2011 - Views: 90

doc
CHAPTER 31F - California State Lands Commission

3.The plasticity index, PI, and the moisture content shall be determined in accordance with ASTM D4318 [6.1] and ASTM D2216 [6.2], respectively. (see Table 31F- 6-1).

http://www.slc.ca.gov/Division_Pages/MFD/MOTEMS/Section3106F.doc

Date added: January 27, 2012 - Views: 18

doc
CONLOCK II CELLULAR INTERLOCKING CONCRETE GRID

ASTM D4318 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of. ... Concrete retaining wall units shall be tested in accordance with ASTM C140,. Concrete retaining wall units shall meet requirements of ASTM C1372.

http://www.nicolock.com/products/walls/wall-systems/trinity/item/download/77

Date added: July 10, 2013 - Views: 9

doc
bid - Overland Park, Kansas

Plasticity Test ASTM D4318 Each Sieve Analysis ASTM C117 and C136 Each Portland Cement Concrete Slump KT-12 Each Unit Weight KT-20 Each Air Content KT-18, KT-19, or KT-20 Each Temperature ASTM C1064 Each Cylinder Preparation (6/Set) KT-22 (includes round ...

http://ppm.opkansas.org/wiki/images/IV-2d.dot

Date added: August 17, 2013 - Views: 5

doc
www.mass.gov

GROUND SNOW LOADS; BASIC WIND SPEEDS; EARTHQUAKE. ... ASTM D156-84 not to exceed 100 blows/ft. as directly measured on the field without. ... ASTM D4318-93. w is the moisture content in percent, ASTM. D2216-92. Figures 9.4.1.1(a) through 9.4.1.1(j)

http://www.mass.gov/eopss/docs/dps/inf/code-change-1600-wind-snow-seismic-loads.doc

Date added: April 24, 2012 - Views: 11

doc
Geotechnical Guidelines Word Document - Kentucky

Geotechnical exploration is necessary to obtain information to assess the stability of the dam. ... (ASTM D4318) 2 per distinct soil unit. Use for soil classification. Grain Size Analysis/Soil Classification (ASTM D422, D1140, D2487) ...

http://water.ky.gov/damsafety/Documents/WRGeotech_Guidelines.doc

Date added: February 5, 2012 - Views: 25

doc
SPECIFICATIONS - Stone Strong Systems

D. ASTM D4318 - Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils (AASHTO T89 & T90) E. ASTM D698 - Standard Test Method for Laboratory Compaction Characteristics of Soil Using Standard Effort (AASHTO T99)

http://www.stonestrong.com/downloads/specifications-11-5-13.doc

Date added: December 11, 2013 - Views: 13

doc
ATB02704 - Aggregates and Granular Materials - ftp.nirb.ca - /

aggregate produced PLASTICITY INDEX ASTM D4318 One per source LIQUID LIMIT ASTM D4318 One per source Note 1: The ...

http://ftp.nirb.ca/01-SCREENINGS/COMPLETED%20SCREENINGS/2005/05UN121-Nunavut%20Airports%20Division%20-%20Iqaluit/01-APPLICATION/060307-05UN121-GN-EBA%20Specifications-ITAE/EBA02704.doc

Date added: November 25, 2013 - Views: 5

doc
Keystone Compac.WORD - York Building Products

ASTM D4318 Liquid Limit, Plastic Limit and Plasticity Index of Soils. 8. ... Keystone concrete units shall conform to the following performance testing: Inter unit shear strength in accordance with ASTM D6916 (NCMA SRWU-2): 600-plf (8 kN/m) ...

http://www.yorkbuilding.com/wp-content/uploads/Compac-III-Specs.doc

Date added: May 21, 2013 - Views: 14

doc
Precast Modular Block Retaining Wall Specification

ASTM D4318 – Standard Test Method for Liquid Limit, Plastic Limit, ... The adjacent retained soil shall be graded to prevent ponding of water behind the completed retaining wall. B. For retaining walls with crest slopes of 5H:1V or steeper, ...

http://www.redi-rock.com/documents/PMBguide/PMB_Guide_Specification_080113.doc

Date added: August 17, 2013 - Views: 45

doc
GUIDE SECTION 02200; ALTERNATIVE 2 (For sewer and pipeline ...

The plasticity index of the material, as determined in accordance with ASTM D4318, shall not exceed 15. D. TYPE D: Type D material shall be used for prepared subgrade under slabs and mat-type foundations.

http://virtual.cocef.org/Discos_documentos_consultores/Disco_372/02200_A2.doc

Date added: April 2, 2014 - Views: 1

doc
Preliminary recommended Standard Tests for Pavement ...

Liquid Limit of Soils (AASHTO T89, ASTM D4318, BS 1377: Part 2) Plastic Limit and Plasticity of Soils (AASHTO T90, ASTM D4318, BS 1377: Part 2) Moisture-Density Relations of Soils (AASHTO T99 & T180, BS 1377: Part 4) There is no direct ASTM equivalent to this test.

http://transportpiu.am/Bent%20Larsen%20lriv%2014.06.10%20franc/Standard%20Tests%20for%20Pavement%20Materials%20in%20Armenia.doc

Date added: March 6, 2012 - Views: 110

doc
excavtg, backflg & compctng for struct - FSD Home

Plastic Index shall be not more than 30 per ASTM D4318, Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils. 2. Minimum laboratory dry weight at optimum moisture content of 110 lbs/CF. 3.

http://www.laschools.org/fcs/cc/lausd-bidding/download/specifications_-_divisions_02_-_16/specifications_-_division_02/02320_ExcavatingBackfillingandCompactingforSyntheticTurfFields(08-04-07).doc?version_id=5494265

Date added: February 2, 2013 - Views: 5

doc
Microsoft Word - RECAP 2003 FAQs Jan 01.doc

Undisturbed soil samples should be collected in accordance with ASTM Method D1587 using thin-walled, ... • Atterberg Limits (LL, PL, PI) (ASTM D4318) . • Particle Size Analysis (ASTM D422) . • Hydraulic Conductivity1 (Constant Head) (Granular soils) (ASTM D2434)

http://www.deq.louisiana.gov/portal/Portals/0/RemediationServices/RPform_5340.doc

Date added: November 6, 2012 - Views: 19

doc
REQUEST FOR PROPOSALS - Virginia

Atterberg limits ASTM D4318. Shrinkage factors of soils ASTM D427. Natural density and moisture content AASHTO T233. Aggregate sieve analysis ASTM C136. Standard Proctor test ASTM D698. Modified Proctor test ASTM D1557. California ...

http://www.dgs.virginia.gov/LinkClick.aspx?fileticket=S71MNcbHMxY%3d&tabid=392

Date added: May 16, 2013 - Views: 23

doc
www.belgarddesignpro.com

ASTM D4318 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils. ASTM D4491 Standard Test Method for Water Permeability of Geotextiles by the Permittivity Method

http://www.belgarddesignpro.com/docs/BARWTech.doc

Date added: May 23, 2013 - Views: 24

doc
TABLE OF CONTENTS - Ohio EPA Home

ASTM, Standard D4318-10. Standard Test Method for Liquid Limit, Plastic Limit, and Plasticity Index for Soils. ASTM International, West Conshohocken, Pennsylvania. ASTM Standard D4643-08 Standard Test Method for Determination of Water (Moisture) Content of Soil by Microwave Oven Heating.

http://www.epa.ohio.gov/portals/28/documents/TGM-03_draft2012.docx

Date added: May 20, 2012 - Views: 53

doc
Excavating, Trenching and Backfilling - Newfoundland and Labrador

Fine grained soils with plasticity index less than 10 when tested to ASTM D4318, and gradation within limits specified when tested to ASTM D422 and ASTM C136: Sieve sizes to CAN/CGSB 8.1. Sieve Designation %Passing. 2.00 mm 100. 0.10 mm 45 100.

http://www.tw.gov.nl.ca/works/masterspec/31233301.doc

Date added: October 16, 2011 - Views: 22

doc
1 - Missouri

Atterburg Limits (ASTM D4318) Total Organic Carbon ( ASTM D2974) Soil pH (USEPA Method 9045C) ... Missouri Department of Natural Resources (MDNR), 2001. Cleanup Levels for Missouri (CALM). Revised, September 1. SCS Engineers (SCS), 2004.

http://www.dnr.missouri.gov/env/hwp/news/riwp-slop-final-01-2005.doc

Date added: February 5, 2012 - Views: 19

doc
SECTION 1 - TABLE OF CONTENTS - Civil Engineering Blog

Liquid Limit and Plastic Limit - AASHTO T 90 (ASTM D4318) Direct Shear Test - AASHTO T 238 (ASTM D 3080) Unconfined Compression Test - AASHTO T 208 (ASTM D 2166) Unconsolidated-Undrained Triaxial Test - ASTM D 2850.

http://iphala.files.wordpress.com/2011/01/chaper-2-page-1-75.doc

Date added: November 10, 2012 - Views: 61

doc
Granular Sub Base - Newfoundland and Labrador

Granular sub base material to Section 31 05 16 - Aggregate Materials and following requirements: Crushed pit run or screened stone, gravel or sand. ... Liquid limit: to ASTM D4318, maximum 25. Plasticity index: to ASTM D4318, maximum 6 . EXECUTION.

http://www.tw.gov.nl.ca/works/masterspec/32111601.doc

Date added: October 3, 2011 - Views: 34

doc
CONSTRUCTION MATERIALS FIELD OF TESTING

ASTM E329 Specification for Agencies Engaged in the Testing and/or Inspection of Materials Used in Construction. ... D4318* Liquid Limit, Plastic Limit & Plasticity Index of Soils. D4718 Correction of Unit Weight and Water Content for Soils Containing Oversize Particles.

http://xa.yimg.com/kq/groups/23711357/461503449/name/ASTM

Date added: May 2, 2013 - Views: 86

doc
www.soilretention.com

Plasticity Index (PI) < 20 and Liquid Limit < 40 per ASTM D4318. B. The maximum aggregate size shall be limited to 3/4 inch (19 mm) unless field tests have been performed to evaluate potential strength reductions to the geosynthetic design due to damage during construction.

http://www.soilretention.com/_admin/userfiles/0411111221VERDURA%20SPEC.doc

Date added: February 18, 2014 - Views: 1

doc
Scope - Home - My Committees

PI Plasticity index, ASTM D4318-93. PAB Anchor design load, N (lbf) PA’ Anchorage attachment design load, N (lbf) Q Scaling factor from the MCE to the design level spectral accelerations; equals 2/3 for ASCE 7.

http://mycommittees.api.org/standards/cre/scast/Meeting%20Materials/spring05/ballot16-05-650-598.doc

Date added: October 23, 2013 - Views: 13

doc
www.acisocal.org

T90 / D4318 Determining the Plastic Limit and Plasticity Index of Soils. ... Experience and knowledge of concrete testing of the previously mentioned ASTM/AASHTO procedures is highly recommended. For more information regarding this program, please contact . Heather Caya at 1-(877) 562-2241 .

http://www.acisocal.org/app/download/7236903689/AGG+BASE+Flyer+2014.doc

Date added: January 4, 2014 - Views: 4

doc
1

Permeability Test, Constant Head (ASTM D2434) 5.100 Ea. Atterberg Limits, Three Point Method (ASTM D4318) 5.110 Ea. Visual Soil Classification (ASTM C2488 ) 6.00 Asphalt ... Soundness (ASTM C131) 7.100 Ea. Proctor Test (ASTM D698, D1557) For Bid Evaluation Purposes Only Table 2 Total ...

http://cityoflynnwood.net/docs/archive/cmsdocs/purchasing/bidsandawards/Testing%20and%20Inspection%20RFP%20FINAL.doc

Date added: August 8, 2014 - Views: 1

doc
CHAPTER 31F [FOR SLC] - California State Lands Commission

3.The plasticity index, PI, and the moisture content shall be determined in accordance with ASTM D4318 [6.1] and ASTM D2216 [6.2], respectively. (see Table 31F- 6-1).

http://www.slc.ca.gov/Division_Pages/MFD/MOTEMS/CHAPTER%2031F%20MOTEMS.doc

Date added: October 30, 2011 - Views: 99

doc
ΕΘΝΙΚΟ ΣΥΣΤΗΜΑ ΔΙΑΠΙΣΤΕΥΣΗΣ

Insoluble residue BS EN 196-2: ... and plasticity index of soils ASTM D4318-10 Particle size analysis of soils ASTM D422-07 Mechanical tests ... Method for determination of water absorption BS 1881-122: 1983 Testing hardened concrete ...

http://www.esyd.gr/eped/1.21339_en.doc

Date added: November 25, 2011 - Views: 43

doc
LOUISIANA MOTOR FUELS - Louisiana Department of Environmental ...

Organic matter (ASTM D2974) $40.00 Unified Soil Classification System (ASTM D2487) $40.00. Atterberg Limits (LL, PL, PI) (ASTM D4318) $50.00. Particle Size Analysis – Sieve (ASTM 422) $50.00. Particle Size Analysis – Hydrometer (ASTM 422) $95.00.

http://www.deq.louisiana.gov/portal/Portals/0/UndergroundStorageTank/2007%20Guidance%20Document.doc

Date added: May 7, 2013 - Views: 10

doc
D4-86(2010) Standard Test Method for Bitumen Content

ASTM-D D5-06e1 . Standard Test Method for Penetration of Bituminous Materials. ASTM-D6-95(2006) Standard Test Method for Loss on Heating of Oil and Asphaltic Compounds. ASTM-D8-02 . Standard Terminology Relating to Materials for Roads and Pavements.

http://grip.de/pdf/astm-doc-eng/astm-D.doc

Date added: May 16, 2013 - Views: 397

doc
1 - Public Utilities Board

DRAINAGE DEPARTMENT. INDEX TO STANDARD SEPCIFICATION FOR DRAINAGE WORK. Clause Page. PART I - GENERAL. 1 General Description … … … … … 1

http://www.pub.gov.sg/general/Documents/std_spec.doc

Date added: September 13, 2011 - Views: 48

doc
River Mile 10.9 Removal Action Pre-Final Design Report, Lower ...

7-3Sand Gradation (Modified ASTM C33 Fine Aggregate) 7-4Geotextile Properties and Applicable Standards. 7-5Material Quantities. 8-1RM 10.9 Composite Samples Waste Characterization Profile . Figures. 1-1Lower Passaic River and RM 10.9 Study Areas. 1-2.

http://passaic.sharepointspace.com/Public%20Documents/LPR_RM10%209_PreFinal_Design_11302012.docx

Date added: February 10, 2013 - Views: 21

doc
www.lwua.gov.ph

Please quote your lowest price on the item/s listed below, ... Sieve Analysis per ASTM D422 2. Atterberg Limit per ASTM D4318 3. Natural Moisture Content per ASTM D2216 4. Soil Classification per ASTM D2487. 1.02 LOCATION OF THE SITES.

http://www.lwua.gov.ph/bids_10/Request%20for%20Quotation%20Geotechnical%20%20Investigatioan%20May%2014%20Final.doc

Date added: November 3, 2012 - Views: 5

doc
Glossary of Acronyms - UNOPS | Home

ASTM D4318 . 1 per 1,000 m3 . and source change . In accordance with . Section 02205 . Grain- Size . Distribution . ASTM D422 or . C136 . 1 per 1,000 m3 . and source change . In accordance with . Section 02205. Article 2.01.1 . Moisture Content . ASTM D2216/ D2974 .

https://www.unops.org/ApplyBO/File.aspx/Annex-D%20_Quality%20Control%20Plan%20-%20New%20Construction%20in%20Ghor%20Hospital.docx?AttachmentID=b2675d0f-c0f9-4cd0-80eb-3b753d569945

Date added: June 20, 2014 - Views: 5

doc
1 - Alberta

.4 ASTM D4318 Standard Test Method for Liquid Limit, Plastic Limit and Plasticity Index of Soils..3 California Division of Highways.1 CAL. 206 Test Method for Specific Gravity and Absorption of Coarse Aggregate.

http://www.transportation.alberta.ca/Content/docType125/Production/02330Earthwork_Materials.doc

Date added: May 11, 2012 - Views: 16

doc
2004 - RCU > Home

Standards for Civil Engineering Technology. ASTM Standards. D422-63(2002) e1 Standard Test Method for Particle-Size Analysis of Soils, ASTM International. D4318-05 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils, ...

http://www.rcu.msstate.edu/Portals/1/Documents/Public/CUR/Curriculum/Postsecondary/Trades_Industrial/[P]_Civil_Engineering_Technology_[2011].doc

Date added: December 8, 2013 - Views: 44

doc
HARRIS COUNTY

The material passing the No. 40 sieve shall meet the following requirements when tested in accordance with ASTM Method D4318. ... ASTM D 4318 “Test Method for Liquid Limit, Plastic Limit and Plasticity Index of Soils” Description.

http://www.pur.hctx.net/specs/2007/070448.doc

Date added: January 29, 2012 - Views: 5

doc
** WARNING ** WARNING ** WARNING ** WARNING **

This document is intended for informational purposes only. Users are cautioned that Caltrans does not assume any liability or responsibility based on these electronic files or for any defective or incomplete copying, exerpting, scanning, faxing or downloading of the contract documents.

http://www.dot.ca.gov/hq/esc/tollbridge/Ben-Mar/006034/Specials/04-006034sp.doc

Date added: June 18, 2012 - Views: 93

doc
2004 - Mississippi State University

Manual of Surveying Instructions, Bureau of Land Management. ... D422-63(2002)e1 Standard Test Method for Particle-Size Analysis of Soils, ASTM International. D4318-05 Standard Test Methods for Liquid Limit, Plastic Limit, ...

http://www.rcu.msstate.edu/Portals/1/Documents/Public/CUR/Curriculum/Postsecondary/Trades_Industrial/[P]_Civil_Technology_[2007].doc

Date added: August 18, 2013 - Views: 17